Category: Car Events

A look at Peugeot’s future products and electrification strategy with the INCEPTION CONCEPT…

Posted in Automobilia, Car Events, Car News, Car presentations, Car safety, Car Shows, Car technology, Concept Cars, Design, Environment, Future car technology, Future technologies, Lifestyle, New Models, prototypesLeave a comment

Featuring a revolutionary exterior and interior design, including the next-generation PEUGEOT i-Cockpit® and innovative Hypersquare control system with steer-by-wire technology, the INCEPTION CONCEPT will inspire PEUGEOT’s future products from 2025 onwards. The better news is that Peugeot plans to bring most of its innovations to production (!)

Based on the STLA Large platform, the fully electric INCEPTION CONCEPT is powered by a 100kWh battery providing a range of 497 miles. With two electric motors, the INCEPTION CONCEPT produces almost 680hp and accelerates from 0-62mph in under three seconds. The model also features 800V technology, enabling it to add 93 miles of range in just five minutes, and is capable of wireless induction charging.

Linda Jackson, CEO of the PEUGEOT brand, said: “PEUGEOT is committed to the electrification of its range. In 2023, our entire line-up will be electrified and in the next two years, five new 100% electric models will be launched. Our ambition is simple: to make PEUGEOT the leading electric brand in Europe by 2030. This objective and ambitious vision pave the way for a radical transformation for the brand, as represented by the INCEPTION CONCEPT.”

Indeed, PEUGEOT will reduce its carbon footprint by more than 50% by 2030 in Europe and to become fully Carbon Net Zero by 2038.

Over the next two years, PEUGEOT will launch five new 100% electric models and by 2030, all PEUGEOT cars sold in Europe will be electric.

Dramatic design

The PEUGEOT INCEPTION CONCEPT introduces a new, simpler and more refined design language for the brand, which will be introduced on future models from 2025. At the front, it features an all-new light signature incorporating PEUGEOT’s distinctive claw design, which is merged with the front grille to create a single object that also houses the sensors. This is made up of a single piece of glass with the logo in the centre, magnified by the 3D luminescent effect.  The front grille and headlamps are in my opinion a bit reminiscent of the ‘70s 504… 

A TECH BAR runs horizontally through the door layer. This flush screen emits different messages to the outside of the car when the driver and passengers approach it. The artificial intelligence equipped on the PEUGEOT INCEPTION CONCEPT makes it possible to recognize the driver in order to set up the comfort settings (seat posture, temperature, driving mode and multimedia preferences) desired by each occupant. In addition, the TECH BAR also displays the battery charge level and houses many sensors and radars, leaving the bodywork completely smooth.

The INCEPTION CONCEPT’s bold design incorporates 7.25m2 of glazing to create a glass capsule for the passenger compartment that plunges to the driver and front passenger’s feet. All the glazing (windscreen, side windows and quarter windows) is made from glass designed for architecture. Adapted to the PEUGEOT INCEPTION CONCEPT, it retains its exceptional thermal qualities and benefits from a multi-chrome treatment (treatment with metal oxides), a process initially used for the visors of astronauts’ helmets by NASA.

Completing the car’s unique design is an exclusive body colour, which highlights the shapes in the bodywork and interacts, like the glazing, by tinting according to the external environment. The paint is single-coated, meaning far less energy is consumed during its application.

‘BEV-by-design’ platform

The INCEPTION CONCEPT has been given the silhouette of a low (1.34m) and efficient saloon and is 5m in length. It is based on the STLA Large platform, one of four future Stellantis Group “BEV-by-design” platforms. The arrival of this new range of platforms from 2023 will revolutionize the PEUGEOTs of tomorrow. Specifically created for electrification, they offer major differences in terms of architecture which enabled designers to completely reshape the PEUGEOT INCEPTION CONCEPT’s passenger compartment.

The new “BEV-by-design” native electric platforms will also introduce technological modules powered by artificial intelligence: STLA Brain, STLA SmartCockpit and STLA AutoDrive. Like the INCEPTION CONCEPT, future PEUGEOT models will be equipped with STLA Brain artificial intelligence and will be fully connected.

Powertrain

The 100% electric PEUGEOT INCEPTION CONCEPT is equipped with 800V technology. Its 100kWh battery enables it to travel 497 miles on a single charge, with extremely low consumption of just 12.5kWh per 100 km. The INCEPTION CONCEPT is capable of adding 19 miles of range in one minute, or 93 miles in five minutes, and can also be recharged wirelessly by induction.

Two compact electric motors, one at the front, the other at the rear, make the PEUGEOT INCEPTION CONCEPT a four-wheel drive vehicle. The combined power is close to 680hp (500kW), enabling it to accelerate from 0-62mph in under three seconds.

Next-generation i-Cockpit®

With its new Hypersquare control system, the PEUGEOT INCEPTION CONCEPT offers an agile driving experience and an all-new, more intuitive i-Cockpit®. Inspired by video games, the Hypersquare control system does away with the conventional steering wheel in favour of digital electric controls and steer-by-wire technology.

The centre of the Hypersquare is a tablet-type screen dedicated to the distribution of control information. The pictograms for the different features (air conditioning, radio volume, ADAS etc.) are displayed on the two side panels to facilitate access to the chosen control. The latter is located inside the circular recesses and can be accessed by moving the thumb only, without taking your hands off the steering control.

The next generation i-Cockpit also includes the Stellantis STLA SmartCockpit technology platform and STLA AutoDrive, enabling Level 4 autonomous driving. When driving is delegated, Hypersquare retracts and a large panoramic screen slides out from the floor to offer a new passenger compartment experience.

 PEUGEOT’s goal is to introduce the Hypersquare on a next generation vehicle in the range before the end of the decade.(!)

Interior

The PEUGEOT INCEPTION CONCEPT features a minimal cockpit dedicated to the driver alone, which does without a dashboard, crossbar and the bulkhead, providing a completely open view of the road.

Sustainable ‘moulded textiles’ are also used throughout the interior. Scraps of 100% polyester fabric from the design centre’s prototyping workshops or from suppliers are re-used to make load-bearing or trim parts. The seats are covered with a velvet made from 100% recycled polyester, which extends onto the floor and features 3D patterns to act as a floor mat.

More Peugeot news soon…

Hans Knol ten Bensel

BMW rides you into an enhanced real and virtual world at CES Las Vegas…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Car technology, Concept Cars, Design, E-mobility R &D and solutions, Future car technology, Future technologies, Lifestyle, New Models, prototypesLeave a comment

The BMW Group is sharing its vision of the future digital experience, both inside and outside the vehicle, at the Consumer Electronics Show (CES) 2023 in Las Vegas.

It presented the BMW i Vision Dee, a futuristic mid-size sedan with a new and pared-down design language. The name “Dee” stands for Digital Emotional Experience – and that is precisely its aim: to create an even stronger bond between people and their cars.

This car has future digital functions will go far beyond the level of voice control and driver assistance systems we are familiar with today.

It starts all with a BMW Head-Up-Display extending across the full width of the windscreen, providing a glimpse of the next vehicle generation.

From 2025 onwards, this innovation will be available in the models of the NEUE KLASSE. The BMW Group has also refined its use of colour-change technology. Having unveiled the BMW iX Flow Featuring E Ink, with the ability to change from black to white, at the last CES, BMW i Vision Dee can now curate its exterior in up to 32 colours.

“With the BMW i Vision Dee, we are showcasing what is possible when hardware and software merge. In this way, we are able to exploit the full potential of digitalisation to transform the car into an intelligent companion. That is the future for automotive manufacturers – and, also, for BMW: the fusion of the virtual experience with genuine driving pleasure,” said Oliver Zipse, Chairman of the Board of Management of BMW AG. “At the same time, BMW i Vision Dee is another step on the road to the NEUE KLASSE. With this vision, we are looking far into the future and underlining the tremendous importance of digitalisation for our upcoming product generations.”

With its intelligent, almost human capabilities, BMW i Vision Dee accompanies drivers not only through real-life situations on the roads, but also in their digital environment.

“A BMW lives by its unparalleled digital performance. BMW i Vision Dee is about perfect integration of virtual and physical experiences,” said Frank Weber, member of the Board of Management of BMW AG responsible for Development. “Whoever excels at integrating the customer’s everyday digital worlds into the vehicle at all levels will succeed in mastering the future of car-building.”

BMW Mixed Reality Slider: into the virtual world in five steps

The BMW, in combination with the advanced Head-up Display, is the digital highlight and central operating control of BMW i Vision Dee. The completely virgin and simple dashboard panel shows just a line with dots. This is the Mixed Reality Slider. By using shy-tech sensors on the instrument panel, drivers can decide for themselves how much digital content they want to see on the advanced Head-Up Display. The five-step dot selection ranges from analogue, to driving-related information, to the contents of the communications system, to augmented-reality projection, right up to entry into virtual worlds. In parallel, dimmable windows can also be used to gradually fade out reality. Mixed reality can be experienced in BMW i Vision Dee in an immersive way that engages different senses without requiring any additional tools, creating a new dimension of driving pleasure for the user.

Advanced BMW Head-Up-Display: in NEUE KLASSE from 2025

The BMW Group is known in the automotive sector as a trailblazer for the Head-Up-Display and has systematically refined this technology over the past two decades. In BMW i Vision Dee, projection across the entire width of the windscreen allows information to be displayed on the largest possible surface – which only becomes recognisable as a display once it is activated. In this way, the BMW Group demonstrates the huge potential of projection technology and BMW i Vision Dee visualizes how a advanced Head-Up-Display could also be utilized in the future for the display and operating concept. The standard-production version of the BMW Head-up-Display extending across the full width of the windscreen will be used in the models of the NEUE KLASSE from 2025 onwards.

Welcome scenario with voice and phygital icons

The digital experience already begins outside the vehicle, with a personalized welcome scenario that combines graphical elements, light and sound effects. Natural language serves as the simplest, most intuitive form of interaction, enabling perfect understanding between humans and their vehicles. The headlights and the closed BMW kidney grille also form a common phygital (fusion of physical and digital) icon on a uniform surface, allowing the vehicle to produce different facial expressions. This means BMW i Vision Dee can talk to people and, at the same time, express moods such as joy, astonishment or approval visually. BMW i Vision Dee can also project an image of the driver’s avatar onto the side window to further personalize the welcome scenario.

World premiere for full-colour E Ink technology

Following the spectacular debut of the BMW iX Flow Featuring E Ink at CES 2022, the BMW Group is now unveiling a full-colour version of the E Ink technology in BMW i Vision Dee that will be used as the outer skin of the vehicle for the first time worldwide.

BMW i Vision Dee, rather than simply alternating between black and white, now showcases a multi-coloured, fully variable and individually configurable exterior. An ePaper film from the BMW Group’s cooperation partner, E Ink, is applied to the body to create this magical display of colour. Up to 32 colours can be displayed.

The body surface of the BMW i Vision Dee is divided into 240 E Ink segments, each of which is controlled individually. This allows an almost infinite variety of patterns to be generated and varied within seconds. The laser cutting process used to trim the films and the electronic control design were developed in partnership with E Ink. The adaptation of this technology for curved surfaces and the programming of the animations, were developed by BMW Group’s in-house engineers – enabling a form enabling a form of customisation that is unique throughout the automotive sector worldwide.

Reductive design – inside and out

The design of BMW i Vision Dee has been deliberately pared down to focus attention on the digital experience and the DNA of the BMW brand. The exterior is defined by the classic three-box sedan design that forms the core of the BMW brand. Traditional design elements, like the BMW kidney grille, twin circular headlights and the Hofmeister kink, are reimagined, with phygital icons replacing analogue elements. This gives BMW i Vision Dee its own digital, but human, character.

Inside, digitalisation goes hand in hand with reductive use of materials, operating controls and displays to ensure nothing distracts from the digital experience and the new feeling of enhanced driving pleasure. The unconventional design of the steering wheel, with its central vertical spoke, creates touchpoints that come to life when approached or touched and can be operated by moving the thumb. These phygital touchpoints control selection of the content projected onto the windscreen and, together with the Head-Up Display, thus support the principle of “hands on the wheel, eyes on the road”.

“With BMW i Vision Dee, we are showing how the car can be seamlessly integrated into your digital life and become a trusty companion. The vehicle itself becomes your portal to the digital world – with the driver always in control,” said Adrian van Hooydonk, head of BMW Group Design. “Implemented the right way, technology will create worthwhile experiences, make you a better driver and simply bring humans and machines closer together.”

Another milestone on the road to the NEUE KLASSE

The future of the BMW Group is electric, circular and digital. BMW i Vision Dee represents the digital aspect of this trio and will be another milestone on the road to the next vehicle generation, the NEUE KLASSE. The BMW Group will provide further insights and glimpses of the revolutionary vehicle concept of the NEUE KLASSE over the course of 2023. See more news soon!

Hans Knol ten Bensel

Fiat present at CES with the 500 electric, and a metaverse powered showroom…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, New ModelsLeave a comment

The FIAT brand is playing its original approach to automotive mobility again at the Consumer Electronics Show (CES) in Las Vegaswith two major exhibits starring the New 500 electric.

FIAT unveils for the first time the world’s first metaverse-powered showroom: the FIAT Metaverse Store. This revolution in customer experience is accessible, thanks to the partnership with Microsoft and Touchcast, at the Microsoft booth located in the West Hall #6017, recreating the feel of a showroom from home.

Alongside the FIAT Metaverse Store, the New 500 will also be the center of attention in the Free2move area of the Stellantis booth.

Reinventing customer approach in North America…

At the Los Angeles Autoshow 2022 Olivier Francois, FIAT CEO and CMO Global of Stellantis, officially announced the launch of the new Fiat 500e in North America in the first quarter of 2024 and the FIAT Metaverse Store will be one of the key innovative pillars for launching the FIAT electric icon in the US.

Launched last December in Italy, the FIAT Metaverse Store makes the Brand a leader in offering an immersive, simple, and human-driven brand experience. Inside the FIAT Metaverse Store, customers will be able to discover, configure, and even purchase the New 500 La Prima by Bocelli, experiencing the feel of a showroom with the help of the FIAT Product Genius, a real person ready to answer any questions. The entire New 500 line-up, additional models and markets can be found in the metaverse-powered showroom during 2023.

The FIAT Metaverse Store is a user-friendly and accessible to all technology, in fact it does not require a virtual reality (VR) headset or expensive hardware. The public will be able to try it out at the Microsoft booth located in the West Hall #6017 at CES 2023.

FIAT and Free2move together for more sustainable urban mobility

Lights shine on the New 500e 3+1 in the special Rose Gold livery, displayed as the only car at the Free2move stand. A collaboration, between FIAT and Free2move, stemming from a common goal: to build an increasingly sustainable urban mobility ecosystem as part of their mission to make EVs more accessible. The two brands are working on a unique value proposition that goes beyond rental, car sharing, and subscription. The customers will be able to enjoy a 360° Free2move experience through a Fiat car for a few minutes, several days or even months. This offer allows customers to tailor their rental contracts and associated services based on usage with a single invoice, directly from a dedicated APP.

More Fiat news soon also on the Brussels Salon de l’auto!

Hans Knol ten Bensel

Volkswagen Group of America will provide a glimpse of the ID.7…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Design, E-mobility R &D and solutions, Future car technology, Future technologies, New ModelsLeave a comment

At the CES (Consumer Electronics Show) in Las Vegas between 5 and 8 January 2023, Volkswagen Group of America will showcase its first fully electric sedan based on the modular electric drive matrix (MEB). It will still be seen in a “smart” camouflage, which uses unique technology and multi-layered paintwork to create light effects on parts of the vehicle.

The ID. AERO3 concept vehicle initially presented in China already provided a preview of the new model, which embodies an aerodynamic design concept and is able to achieve ranges of up to 700 kilometers (WLTP).

After a six-year break, Volkswagen Group of America is returning to the CES – the world’s largest trade show for electronics – with a very special product…

With the new ID.7, VW is extending its electric model range into the upper segments. The ID.7 is one of ten new electric models that VW is planning to launch by 2026.

VW seems to have learned some lessons when it comes to the functionality of the various infotainment and dashboard commands. It ofeers a new display concept, an augmented reality head-up display, a 38-centimeter (15-inch) screen and new air conditioning controls integrated into the first level of the infotainment system. Now we also have illuminated touch sliders…

Like all other models in the ID. family, the ID.7 is based on the MEB of the Volkswagen Group. The advantages of the modular matrix with short overhangs and long wheelbase (2.97 meters) provide a large interior.

With its ID.7 sedan, Volkswagen is expanding its successful fully electric ID. family into the upper middle class of the high-volume segment and advancing its electric mobility campaign with the ACCELERATE strategy. VW has already reached a first milestone: Since the first ID.3 models were handed over to customers in September 2020, Volkswagen has delivered 500,000 vehicles from its ID. family worldwide through its subsidiaries – around one year earlier than planned and despite the ongoing difficulties in the supply chain.

After the ID.3, ID.4, ID.5 and ID.6 (only in China) models and the new ID. Buzz7, the ID.7 will be the sixth model from the ID. family and is Volkswagen’s second global car to be based on the MEB after the ID.4. It is planned to launch the electric sedan in the three primary markets of China, Europe and North America. The ID.7 for the European market will be produced at the Volkswagen Emden plant. After the ID.4, it will be the second model based on the modular electric drive matrix to be built in Emden.

More news soon!

Hans Knol ten Bensel

Opel Mokka and the best barista in the world…

Posted in Automobilia, Car Events, Car News, Car presentations, Lifestyle, men women and cars, New Models, PhotographyLeave a comment

On October 1, coffee aficionados around the world celebrated their favorite hot drink on International Coffee Day.

This was a reason of the dynamic Stellantis PR team to to let one of the best baristas in Belgium, Peter Hernou, show us how to serve a good coffee. Because let’s face it, a Mocha coffee in the morning is a day without worries. And with the award-winning Opel Mokka, Opel offers the perfect companion to further color the day.

So we went to the beautiful Pajottenland around Brussels to have a drive with the Mokka and meet Peter Hernou and enjoy his heavenly coffee.

By the way, Opel chose the name “Mokka” by analogy with the coffee/espresso beans that are “small but with a lot of character” or, like the car, “compact in size and big in character”.

It was a very enjoyable day, and we learned a lot about coffee making. The first and most important rule is to have fresh roasted coffee beans, ground just minutes before you make it.

Of course we also had a delightful drive at the wheel of the electric Mokka through the hills of Pajottenland.

Of course, the customer has ample choice, this subcompact SUV from Opel is available as a battery electric vehicle, or with petrol and diesel engines, – just as they would choose their favorite coffee….

Hans Knol ten Bensel

Nissan press conference 2023: more than ever offering clever and future-oriented electrification with a renewed range…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Car technology, Design, E-mobility R &D and solutions, Environment, Lifestyle, New ModelsLeave a comment

Nissan Belux was the first to hold a press conference prior to the Brussels Auto Show 2023, and organized it at the magnificent premises of Quartier Papier in Zaventem. On the photo below you see the Nissan Ariya, which according to Nissan, redefines E-Driving…

At the start of the conference, Jerôme Saigot, Managing Director of Nissan Belux, stated that with the Ariya, LEAF and Townstar EV models, Nissan has a very nice range of e-vehicles. But consumers are still not fully ready for a 100% electric range of cars. With the new Qashqai e-POWER and the X-Trail e-POWER, they can experience the pleasure of a 100% electric transmission without having to recharge the car via a socket, thanks to a second gasoline engine that produces electricity, he said. Indeed, Nissan goes a step further than the competition with new technologies such as e-POWER. So Nissan reaffirms its role in the fields of crossovers and electric cars. But read further…

Hans Knol ten Bensel

Jerôme Saigot, Managing Director of Nissan Belux, presented the new Nissan electrified range and the environmental strategy of the brand towards 2030…

Nissan’s green strategy for 2030…

Jerôme Saigot also stressed that sustainability is at the core of Nissan’s long-term vision, Ambition 2030. Responding to critical environmental, societal and customer needs, this strategy sets out to deliver electrified models and technological innovation in key markets globally, empowering mobility and beyond. Ambition 2030 supports Nissan’s goal which is to be carbon neutral across the life cycle of its products and operations by 2050. 

Nissan JUKE Hybrid: new advanced powertrain offers efficiency and responsive performance

Indeed Nissan is embarking further on the 100 % electrification of its range. We have the Juke, the popular compact crossover, offered with hybrid technology. Key to the driving pleasure at the heart of the Nissan JUKE Hybrid is an advanced low friction multi modal gearbox, using  dog clutches instead of conventional synchronizer rings to shift the 4 “ICE” gears and 2 “EV” gears. Additionally, to reduce friction, this gearbox does not use a clutch. All vehicle starts are 100% electric, and the 2 EV motors are used in combination to synchronize the gears, delivering smooth and responsive acceleration. We will be keen to drive a hybrid Juke soon, and tell you about our driving experience with it.

A car which will please many is the Nissan Qashqai  e-Power, said Mervin Keuter, Communications Director at Nissan Belux, offering 100 % electric power without the need for recharging externally. Indeed, a combustion engine coupled to a generator provides the electricity. The e-POWER system consists of a high-output battery, complemented by a variable compression ratio 1.5-litre three-cylinder turbo-charged petrol engine generating 156hp, a power generator, inverter and 140kW electric motor of similar size and power output as found in Nissan’s electric vehicles. The petrol engine generates electricity, which can be transmitted via the inverter to the battery pack, the electric motor or both, according to the driving scenario.

Melvin Keuter, Communications Director at Nissan Belux, highlighted the qualities of the Nissan Qashqai  e-Power…

What sets this powertrain apart is that the electric motor is the sole source of power for the wheels, so its response is instant and linear. Needless to say that also here we are looking forward to gets our hands on one to experience how all this actually works. It certainly is clever and responds certainly to what modern-day drivers want… we also want to see how economical and environment friendly all this still is.

The dashboard of the new Nissan X-Trail with e-POWER and e-4ORCE…

Another important novelty for Nissan is the revamped X-Trail with its e-4ORCE  system on X-Trail and fully electric Ariya. The innovative e-4ORCE all-wheel drive system was conceived for use on either Nissan’s pure electric powertrains or with its e-POWER system, mentioned above. In both cases, the driven wheels are powered purely by electric motors fed by the battery.

In the case of the X-Trail, the dual e-motor system has a total output of 157kW (213PS) with a 150kW front motor and a rear 100kW motor. This generates lively acceleration from 0-100km/h in 7 seconds. Nissan proudly announces that a rear electric motor has its advantages: it has a 10,000 times faster rear torque response than a mechanical 4WD system(!).

Rémy Le Gall, Marketing Director of Nissan Belux, commented also on the electrified Nissan range and last but not least dealer organisation and client approach, of which more later in a separate report!

Now, on the X-trail, you can also opt for the turbocharged 1.5-litre variable compression ratio powering the wheels in the traditional fashion. Generating 120kW (163PS) and 300Nm of torque, it will be offered only in two-wheel drive configuration, with power to the wheels being transmitted via Xtronic stepped continuously variable transmission. In driving scenarios with relaxed driving and light acceleration, the engine switches to high compression ratio for optimised fuel efficiency, while in situations where more performance is needed, the compression ratio is adjusted to a low level.

The powertrain is also equipped with 12v mild hybrid technology. The system provides torque assist, extended idle stop, quick restart and coasting stop, with benefits to both fuel economy and CO2 output.

The Nissan X-Trail e-4ORCE offers 100 % electric power without the need for recharging externally…

Driving the future: the Ariya

Staying true to Nissan’s heritage of fun-to-drive, exciting vehicles, the Ariya is built on the all-new Alliance-developed CMF-EV platform that’s optimized to deliver unparalleled performance.

The Ariya’s all-electric platform combines excellent power delivery, charging capabilities and range, with a carefully tuned balance between ride comfort and handling agility. Available in three versions (Ariya 2WD 63kWh, Ariya 2WD 87kWh, Ariya e-4ORCE AWD 87kWh) and a range of up to 533 km, Ariya can confidently meet a variety of customer needs.

The Ariya 87kWh can recover up to 350 kilometres with a 30-minute quick charge using a CCS charging system. The battery pack sits at the base of the chassis to ensure 50/50 weight distribution on the e-4ORCE version and near-equal weight distribution on the 2WD versions. During benchmarking, engineers placed great emphasis on striking the ideal balance between handling agility, secure feeling and ride comfort, something not all EV rivals are known for.

Subtle regional differences exist for Ariya, as well. For example, European consumers demand responsive steering and high manoeuvrability, but also require additional stability at higher speeds, so damping forces were increased to improve body control. Nissan Europe engineers also adjusted spring rates and retuned steering feedback to increase on-centre definition at higher speeds.

A timeless Japanese design language…

Incorporating Nissan’s Japanese DNA, Ariya’s striking exterior and interior reimagines EV potential by embodying Nissan’s Timeless Japanese Futurism philosophy of powerful design that fuses aesthetics with functionality while creating an upscale, open atmosphere.

The all-new EV platform and compact nature of powertrain components made it possible for Nissan to position Ariya’s climate-control system under the hood. This allowed designers to use the whole length of the cabin and create a flat, open floor with a lounge-like space inspired by premium futurism.

For the LCV market: the new Townstar…

The Townstar EV builds on the success of the e-NV200. Built on a shared CMF-C platform, the new vehicle will be manufactured at the Alliance centre of excellence for small vans in Maubeuge, France.

The fully electric version of the all-new Townstar EV features a powertrain optimised with intelligent energy management and battery thermal cooling. The Townstar EV is able to achieve a superior range autonomy of up to 300km (WLTP cycle). Delivering 122 PS and 245Nm of torque, the Townstar EV’s  45kWh battery can accept AC charging (11 kW or 22 kW) or DC quick charging (CCS format). The latter of which enables users to charge the battery from 15% to 80% in as little as 37 minutes.

Lots of interesting news from Nissan, keep posted for further Nissan news and driving reports of their interesting new cars!

Hans Knol ten Bensel

The Alfa Romeo Tonale Plug-In Hybrid Q4: the full story of a modern, electrified thoroughbred…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car production and factories, Car technology, Design, E-mobility R &D and solutions, Environment, Lifestyle, New Models1 Comment

We drove the Alfa Romeo Plug-in Hybrid Q4 Veloce in the historic roads near Biella…

Alfa Romeo is at an important turning point of its long history. With the Tonale, this potent, 280 HP stylish compact SUV, it wants to make a fundamental transition. It is the first milestone on the way to zero emission(s) – within 5 years the brand wants to see all its Alfa’s electric. It makes us shiver, quite frankly, and hopefully not literally, when a cold winter will bite us all in conflict ridden Europe nowadays.

But indeed, a positive mind and hope should fulfill our hearts, and looking at the mechanics of this Tonale, there is still plenty to let it beat a bit faster.

Hans Knol ten Bensel

An excellent and very convincing thoroughbred hybrid.

The Tonale is conceived when the merger between FCA and PSA was not yet achieved, and this is one of the (main?) reasons we find a so-called FCA “GSE” or Global Small Engine, also marketed as Firefly, under the hood as its combustion engine. This is a family of engines produced by Fiat Chrysler Automobiles or (FCA) starting in 2016, and subsequently Stellantis.

The unit in the Alfa is also dubbed as the “FCA e-engine” and is to be seen in slightly different power versions now also in the Jeep Renegade 4xe, in the Jeep Compass 4xe. It is being produced in the Brazilian Betim plant, now the largest vehicle plant in Latin America and one of the largest in the world. It was the production unit with the largest capacity installed of the entire Fiat Chrysler Automobiles (FCA) group. The Tonale itself rolls of the production lines at the Stellantis plant in Italian Pomigliano d’Arco, a municipality of the Metropolitan City of Naples in Italy, located north of Mount Vesuvius.

Of course, this engine embodies the very latest state of the art technology. Indeed, this new generation MultiAir III, present in the GSE family, has even more flexible valve control. The new cam profile with pre-lift allows the opening of the suction valves during the exhaust phase, aiming at the realization of the internal EGR, with reduction of nitrogen oxides and increase of the efficiency of the engine in the partial load. Besides, the lifting profile of the MultiAir III intake valve is more extensive and makes it possible to manage the effective compression ratio of the engine, keeping the tendency to detonation under control regardless of the fuel used. Wow!

The unit produces 180 HP or 132 kW, and is coupled to a 6-speed automatic transmission, which provides traction to the front axle. We must say that the unit is not only smooth and very willing, it also produces the unmistakable, typical throb of a classic Alfa; the sound engineers did truly excellent work!

But then, this is a fully fledged hybrid, and this Tonale Q4 has an electric motor capable of supplying 90kW of max peak power and 250 Nm of torque to the rear axle.

The battery at the centre and the electric motor and its battery junction control box at the rear warrant an excellent weight distribution…

The 306-volt, 15.5 kWh lithium-ion battery supplies an electric range of over 80 km in the urban cycle and more than 600 km of total range. It is also excellent in terms of sustainability thanks to the new hybrid drivetrain which reduces Co2 emissions to 26kg/km, bringing the range’s total emissions down by 40%. A reduction has also been made in fuel consumption, which has been brought down to 1.14 liters per 100 km in the WLTP cycle. Plus, with the aim of providing maximum efficiency, it takes less than 2.5 hours to fully charge the battery when the 7.4 kW onboard charger is in use.

Driving is believing…

We took the Tonale “Q4” -as we shorten its name here – on an interesting 102 km road circuit laid out by the Alfa people in the surroundings of the Balocco proving ground. It led us via an interesting picturesque city Ricetto di Candelo and its beautiful Castello di Castellengo towards Biella, then took us on a nice curvy stretch back to the Autostrada direction Balocco. Endearing is the precision of its steering, and the feedback of the road surface in your hands at the wheel. You can really place this Alfa on the ideal line and adopt some razor sharp driving, even in the “natural” or “N” mode. We found the steering a bit too light however, except in the “D” or Dynamic mode, where the steering is more direct, even more responsive and feels a bit heavier.

The gleaming row of Alfa’s ready for the road test, aligned in front of the Balocco Proving Ground headquarters…

But pleasure at the wheel is to be had every inch of the way, and we found the Alfa also display excellent neutral handling, also thanks to its ideal weight distribution. Icing on the cake was a stint on the curvy circuit section of the proving ground, behind a Giulia Quadrifoglio pace car. It gave us the opportunity to drive flat out and (safely) close to the limits of this endearing Tonale, and the car could prove its qualities masterfully. Remember, the four wheels are driven, the front wheels being powered by the internal combustion engine and the rear wheels driven by the electric motor. Your servant could thanks to the e-AWD system, enjoy the instantaneous deployment of 100% of available torque from the electric motor, with a rear axle responding as soon as one steps on the throttle, and this resulted in excellent and stable out of corner acceleration, truly exhilarating indeed!

The performance is of course nothing short of astonishing. On the short straights of the circuit speeds well over 170 km/h were easily achieved, with stopping power to match. The “Q4” Tonale shoots from 0 to 100 km/h in merely 6,2 seconds and hurtles further to a top speed of 206 km/h. On e-power alone, the Tonale can achieve 135 km/h.

The suspension is well calibrated. For technical buffs we tell you here that the Tonale, as a result of its development history, runs on the FCA Small Wide platform of the Jeep Compass of the second generation.

The D.N.A. selector at the centre of action…

You can drive this Alfa exactly how you feel. We already applauded its qualities in the Dynamic mode, and the subdued but sporting roar of the engine still rings in our ears. But then you can also enjoy the agility, responsiveness and nimbleness of the Alfa Tonale in a more refined, “zen” way, which Alfa calls “modern sportiness”. We do agree, as the transgression between engine and E-power is ever so smooth as to becoming completely imperceptible, and that is no small feat. So when you select “N” or “Natural” mode, it keeps hybrid driving to all-wheel drive to optimize performance. The use of combustion engine and electric motor is automatically managed and allows for energy and fuel savings without giving up on performance.

Last but not least there is the “Advance Efficiency” mode, calibrated to obtain maximum energy efficiency in full-electric driving mode. It is the ideal driving mode in urban traffic. When you lift the throttle, the car continues driving in “Sailing.” Meanwhile, when one is going downhill, the new eCoasting Descent Control is activated to maintain a constant speed of 50 km/h, which is however adjustable with a light dab on the throttle or brake. Specifically, “E-Save” allows one to recharge or maintain the battery level when the internal combustion engine is on, and there is also the regenerative braking system.

Premium comfort and safety

The Tonale is quite roomy, remember, it rolls on the second generation Jeep Compass platform. Sound insulation is also quite good, enhancing the “zen” driving experience. Moreover, on-board comfort is also ensured by dual-zone climate control, pleasing ambient light, a sophisticated Infotainment system, ventilated and heated front seats, and a 14-speaker Harman Kardon sound system.

It also includes ADAS systems for level 2 automatic driving, a hi-res camera which provides a 360° view of the car, a Blind-Spot Detector and Rear Cross-Path Detector, as well as superior structural and industrial quality which earned it a 5-star NCAP rating.

Software connectivity…

Amazon Alexa allows one to remain constantly updated on the state of the vehicle from the comfort of one’s home, as it provides useful information like the charge Tonale Plug-In’s battery. The built-in Infotainment system comes standard and offers contents, functionalities, and services which are constantly being updated via its customizable Android operating system and 4G connectivity with “Over The Air” (OTA) updates.

Thanks to a hi-res screen whose overall dimensions are 22.5”—a 12.3” totally digital screen and a 10.25” main touchscreen unit, the Tonale Plug-In ensures easy-to-use connection. The centre 10,25” screen is also seen by the way in the 500e. The Tonale Plug-in Hybrid Q4’s circular dials include ad-hoc upgrades like the electro-biscione in the lower part of the right dial which changes color based on the electric motor’s status (off, on, on and charging) and so provides all the information related to power and charging. Clever!

Four new functionalities of Alfa Connect Services make their debut on the Tonale Plug-in Hybrid Q4:

E-control: it allows the customer to control various functionalities based on the EV features—like charging and the climate control system—at a distance directly from the My Alfa Connect App, which you have to install on your phone.

Dynamic Range Mapping: it allows drivers to travel with peace of mind as it shows them the destination they can reach based on the battery charge both on the navigation system map and the My Alfa Connect app.

At the end of our 105,9 km road trip, the instruments tell the story: we drove 50,6 km on engine power, 55,2 km on batter e-power. This resulted in a consumption of 3,86 litres/100 km, but then with 8 km left in the battery, so we estimate some 14 kW consumed…

Charging Station Finder: it allows the customer to see the nearest public charging stations both on the navigation system map and the My Alfa Connect app.

My eCharge: it allows for the use of the My Alfa Connect app to directly access Free2Move eSolutions services to manage public and private charging. In fact, it is possible to locate the public charging stations, check the charging methods, make payments, visualize the charge history, manage one’s own Wallbox to decide how much electricity to use and even increase, decrease, suspend, and reactivate the charge.

Your Tonale has an NFT which lets you generate a certificate…

This means that specifically, based on the customer’s selection, the NFT generates a certificate which guarantees the identity and good maintenance of the vehicle, and thus supports its residual value. The NFT certificate provides a further source of credibility on the used car market and is even more valuable on the Tonale Plug-In Hybrid Q4 as it contains even more information.

A special “Edizione Speciale” at the launch…

The Tonale Plug-in Hybrid Q4 is the top-of-the-range model and is in line with the simplification and rationalization of Alfa Romeo’s lineup strategy. In fact, it can already be ordered in the exclusive EDIZIONE SPECIALE launch version and in the VELOCE trim which has been made to reach the most in terms of performance and sportiness.

The EDIZIONE SPECIALE offers inserts on the titanium body, a special badge on the fenders, and a “Tonale” black badge, 20” alloy wheels, metallic pedals, red Brembo brake calipers and aluminum shift paddles which are integrated into the steering column. Later on, customers will be able to order the Tonale Plug-In Hybrid Q4 in the Ti trim for a more elegant and distinctive character.

We have to wait a bit to get our hands on this remarkable Alfa for a more extended test, but stay tuned for more Alfa news soon!

Hans Knol ten Bensel

We drove the Alfa Romeo Tonale Plug-In Hybrid Q4 in Balocco: the wonderful panache of today’s efficient sportiness…

Posted in Automobilia, Car Events, Car News, Car presentations, Car technology, Car Tests, Lifestyle, New Models1 Comment

The cars were lined up for us at the Bella Luigina farmhouse, centre and headquarters of the proving ground.

The world famous proving ground and high speed test circuit at Balocco, built in 1962 by Alfa Romeo to test the Giulia’s as well as the racing cars, was the setting for us to get a hands on driving experience of the brand new Tonale Plug-In Hybrid Q4. The Test Track was built at Balocco, in a strategic location between Turin and Milan.

It all proved to be absolutely epic. The handling and driving dynamics of the Tonale on the state of the art test circuit, with its plug-in hybrid 4 WD drivetrain which produces not less than 280 HP, was the stuff of legends to say the least.

In front of the stables of the Bella Luigina farmhouse – the former home of legendary Autodelta racing department –  stood these impressive Tonale’s, waiting for a test drive…

We had also a taste of what Alfa calls its “efficient sportiness” and what it understands this sportiness to be in our modern times. This Alfa Tonale indeed displays its formidable performance in a totally effortless, mechanically refined and predictable manner, which has to be experienced to be believed.

The important loan documents for a drive in this wonderful modern day Alfa, including the permission to have a go at (almost) racing speeds on the Balocco test track!

We will of course come back the coming days on this presentation of the Tonale Plug-In Hybrid Q4, a very important car in the new future strategy of Alfa Romeo.

More very soon!

Hans Knol ten Bensel   

Lancia starts a journey from its iconic past to a stylish future…

Posted in Automobilia, Car Events, Car News, Classic and Vintage Cars, Design, Fashion, Lifestyle, New ModelsLeave a comment

Today starts the first of three appointments in anticipation of the Lancia Design Day on November 28th, the first event of Lancia Renaissance to describe the style of some of its most past iconic vehicles which inspired the design of its three future models.

The stars are the Lancia vehicles which have inspired so many car lovers: from Aurelia to Flaminia, from Fulvia to Beta HPE, Gamma, Delta, Stratos, and 037. Some are just the pinnacle of elegance, while others are brutal and efficient. But all have a style capable of remaining timeless. This is what kept them beautiful, contemporary, and authentic expressions of Italian design until today.

“The design and beauty of these “moving masterpieces” inspired us in our creation of the three Lancia models of the future” stated Luca Napolitano, Lancia CEO. “This includes the new Ypsilon in 2024, our new flagship which will allow us to enter Europe’s biggest segment, and the sculpted and muscular new “Delta” in 2028 with its geometric lines which will excite car enthusiasts throughout Europe.

We like to describe Lancia as a “Progressive Classic” brand, continues mr. Napolitano, where “Classic” means leveraging and respecting the value of our heritage, while “Progressive” entails our ability to look to the future with ambition. Innovation and timeless design have always been our values and we now want to add sustainability, and responsibility, always putting the customer at the center of our value proposition. These are the guiding principles of the ten-year plan of our Renaissance: through them, we are aiming at becoming a credible and respected brand in the premium European market. Protagonists of this roadmap will be the three new Lancia models of the future that we designed to make them recognizable and consistent one another. All three vehicles will feature three distinctly Lancia design elements: the calice, the sinuous lines and the geometric-primitive forms. Inspired by the front of the iconic Lancia Aurelia and Delta, the new calice will be reinterpreted in a modern key, preserving its distinctive feature that brings together a vertical and horizontal line to include the Brand logo.”

Moreover, the three new models will display sinuous lines on their side, a typical feature of some of Lancia historical models, such as Aurelia B20.

Finally, there are the geometric-primitive forms on both the front and the rear, among which the round taillights stand out, that refer to the Brand’s more brutal and technical spirit, which tips its cap to the legendary 037, Stratos, and Delta, the racing “beasts” that dominated Rally for over 20 years”.

Besides elegance and grit, there is a third element of Lancia design that is eclecticism, i.e., the tendency to be inspired by various sources, even contrasting ones, to create something harmonious and consistent at the same time. This is what happens, for example, in the Italian living room areas that inspired Lancia to create the original and welcoming interiors of the Gamma and Beta models. The same refinement of the interiors can be found in the 1965 Fulvia Coupé, elegant, aggressive and high performing at the same time. This is another example of Lancia eclecticism.

The Lancia Beta HPE, marking an era with its “venetian blinds-inspired structure”

The Lancia Beta HPE (High Performance Estate) is a gorgeous, sporty, and high-performing family car which is low, graceful, and equipped with a spacious trunk. Designed by Pininfarina and produced in three series, it is definitely the most fascinating Lancia Beta model. Introduced at the 1975 Geneva Motor Show, the Lancia Beta HPE stood out for its eclecticism featured as the “practical elegance”. The rear of the cabin stands out for its angled hatch where one can make out an innovative venetian blinds-inspired structure behind the glass, which limits the effects of sun glare and protects rear visibility. This innovative solution is finished off by two trims on the third pillar which gets visually blended with the original finish on the rear window.

Lancia Gamma Coupe: the “traveling living room” that sets new rules…

At the Geneva Motor Show in 1976, Lancia displayed the futuristic design of the Lancia Gamma Coupe. With classic exteriors and eclectic interiors, this vehicle is remembered as the “traveling living room”. It was given this nickname as the cab recreates a welcoming, comfortable, and innovative atmosphere, as demonstrated by its original color combination and its dashboard inspired by the  product design of the 70’s. The refinement and the fine quality of the material are the result of collaborations with famous fashion brands, including the maison of Ermenegildo Zegna. The final evolution of Lancia great GT coupes, a noble range that includes Aurelia and Flaminia, the Gamma Coupe was inspired by the Flaminia Coupe. This might be why it looks more graceful and sleeker at first glance than the five-door sedan, thanks as well to its slanted roof. More stylish news soon, and for now just look at the photos… and the film which you can also admire on my Instagram page.

Hans Knol ten Bensel

Alfa Romeo presents heritage program…

Posted in Automobilia, Car Events, Car manufacturers strategy, Classic and Vintage Cars, Manufacturer's Classic Centers, Museums, Pre-War Classics, Service & Repair, UncategorizedLeave a comment
The Alfa Romeo SZ

At the 39th edition of “Auto e Moto d’Epoca”, one of the most important events in Europe for vintage car and motorcycle enthusiasts, Alfa Romeo presents the “Alfa Romeo Classiche” heritage program, a range of services with the precise aim of protecting and promoting the history of the iconic Italian brand.

For the first time in Stellantis, the brand’s top management is personally involved in all the activities that make up the whole range of its dedicated services. In fact, the certification committee is chaired by Alfa Romeo’s CEO and the Head of Heritage department, with the support of the Alfa Romeo Museum. This support is crucial, as this museum houses the production registers and all the technical documentation used by the committee to analyze the information on the examined cars.

Abarth is also incuded in the overall Stellantis Heritage program…

Jean Philippe Imparato – Alfa Romeo CEO: “we are enhancing our historic heritage”

When presenting the program, the CEO stated: “Alfa Romeo is going through a key phase in its history. The historical period we are going through is a genuine evolution. The brand’s future includes very ambitious goals aimed at redefining the concept of sportiness in the 21st century, while remaining faithful to its DNA. While planning for the future, our heritage is always our main source of inspiration. For us, the Alfa Romeo Classiche heritage program aims to enhance our historic automotive heritage by certifying the authenticity of vintage Alfa Romeos and giving new life to marvelous examples that still captivate and excite car enthusiasts around the world.”

The program…

Parts for the Lancia Delta Integrale are also provided…

 The Alfa Romeo Classiche heritage program consists of the Certificate of Origin – which has been offered for Alfa Romeo cars since 2016 – together with the Certificate of Authenticity and the Restoration. The Top management of the brand personally chairs and intervenes in the committee that evaluates historic cars and issues the certifications with the support of the Heritage team and the experts in Alfa Romeo history.

Issuing a Certificate of Origin…

Alfa Romeo offers the opportunity to discover the history of each car through its chassis number. The service provides for an accurate document review at the Brand’s production registers and the issue of a certificate certifying the car’s year of production and original configuration: model specifications, engine serial number, original exterior and interior details.

… and a Certificate of Authenticity.

Historic gems are kept and restored by the heritage department…

After analyzing in detail the historic car taken under consideration and verifying its production data and technical specifications at the company archives, Alfa Romeo, with the support of the Heritage department, certifies the authenticity of the classic car. To obtain this certification each car goes through a rigorous inspection and evaluation process which is carried out by the specialized team, verifying the authenticity of the car and its components and the functioning of the main mechanical parts. The vehicle can be examined at the Officine Classiche in Mirafiori or directly at the customer’s home, if he prefers, or at the Stellantis & You sales and service dealership in Rome and Palermo.

A fully fledged Restoration service.

Furthermore, the same team that takes care of the’ historical collection is available to private clients, with services ranging from simple maintenance to complete restoration: from diagnosis to exterior restoration, repair of individual mechanical and aesthetic components, and final testing.

A dedicated area on the official Alfa Romeo website…

The brand will introduce an area dedicated on its website to the new “Alfa Romeo Classiche” heritage program that allows lucky owners of historic cars to make use of programs dedicated to Certificates of Authenticity and Restoration. It will therefore be possible to receive all the information and support necessary to start a dedicated and personalized program directly from the brand’s website.

To put you in the mood, just look at the accompanying photos…where you don’t see only Alfa’s, but also Lancia and Abarth, which are also taken under the wings of the Stellantis Heritage depoartment…

Hans Knol ten Bensel