Category: Car presentations

We drove the Nissan Qashqai e-power: enjoying the delights of EV driving…with no strings attached

Posted in Automobilia, Car News, Car presentations, Car technology, Car Tests, E-mobility R &D and solutions, New ModelsLeave a comment

We all know it too well: Battery powered full EV’s are just wonderful to drive, seducing you with their stream of vibrationless, quiet and instant EV power.

We also realize however that at least in Belgium and also in several European countries the public charging infrastructure seems to be still in its infancy, and when you don’t have a house with a driveway with your own charging unit, you can forget about fully enjoying your EV for private use.

Indeed, apartment or condominium inhabitants can also better look elsewhere: beefing up the power circuit in de building meets much resistance from the owners, and they also find the potential fire hazard of an EV car in their underground garage rather too big.

So if you want to sell a car to a wide public which wants to enjoy the EV smoothness, without the recharging troubles, then it is wise to develop a car such as this Qashqai “e-power.”

The Nissan engineers indeed took the hybrid concept a step further: the petrol engine, here a 1,5 litre three cylinder unit,  just generates electricity and the wheels are therefore only driven by an electric motor. Does it all work fine? Just read on…

Hans Knol ten Bensel

Full Hybrid the Nissan way…

Let’s tell it right away, this is definitely one of the very smoothest hybrids I have ever driven. Indeed, total EV smoothness is achieved as there is only the electric motor powering the car. This electric motor is good for 140 kW with a torque of not less than 330 Nm. So this Qashqai is indeed well powered, as the performance figures clearly show. This Nissan will accelerate smoothly from 0 to 100 km/h in merely 7,9 seconds, reaching an electronically governed top speed of 170 km/h.

The engine – the Nissan KR15DDT unit , a 1498 cm3 3 cylinder unit with direct injection, DOHC and CVTCS (Continuously Variable Timing Control System), is very well insulated and indeed is almost inaudible, adding greatly to the pleasant feel of driving a fully fledged EV. Just for the record, it develops 116 kW / 158 PS / at 4600 rpm, torque is 250 Nm between 2400 and 4400 rpm.

Nissan also names this engine ‘VC Turbo’, with those first two letters standing for Variable Compression. The engineers went to very great lengths: instead of conventional connecting rods, the pistons are joined to the crankshaft through motor-driven, multi-link devices which vary the top and bottom dead centre positions of the pistons. This allows to adopt a high compression when performance is wanted, or low compression to improve fuel economy. Soo clever!

But how about fuel efficiency and consumption? As there are invariably losses in the drivetrain in the generation of the electric energy, you are well advised to adopt a smooth driving style, driving with anticipation in order to save as much kinetic energy as possible. The less kW the engine has to generate given a certain distance, the better it is.

Of course, the hybrid concept in this Qashqai has also efficiency gains when the urban pace is low and involves many stops.

Simply because under these circumstances the EV motor does all the work, with the combustion engine recharging the battery under ideal load and revs, computer controlled of course. Indeed, only with the advent of electronic management of the drivetrain is this possible, but this has now been the case for many years, and has already been proven millions of times. It is good to note too that the e-power Qashqai has a 2.1kWh battery, which is somewhat larger than most non plug-in hybrids.

Therefore the Qashqai can achieve good efficiency in urban traffic, where we achieved a consumption between 6 and 6,5 l/100 km. On the open road, the engine has to feed rather more the electric motor with electricity, so when speeds are moderate, say up to 100 km/h, it is still possible to stay in the 6 litres/100 km range. 

It is only on the motorway at high cruising speeds that things are getting a bit awkward. The motor has then to feed the e-power to the electric motor for real, and this means averages between 7 and 7,8 l/100 km. So, what’s the verdict? EV smoothness and “zen” character of the drivetrain is yours indeed to enjoy fully, and we loved the Qashqai e-power for it. The consumption however will not break records here. You just need a very sensitive right foot and the constant awareness that developing kinetic energy costs money at the pump, and that you have to retain it as much as you can, adopting an anticipative driving style. Certainly in urban traffic the fuel economy is very creditable indeed…

You have many choices in driving this Nissan: The D-Mode lets you select between normal, power and eco, the EV button lets you use the electric motor in urban driving conditions as much as possible, and the e-pedal lets the electric motor act as a generator when you lift the throttle…

The qualities of a bestseller…

Did you know that in the UK the Qashqai is a bestseller in its segment? By the way, it is built in the Nissan factory in Sunderland, UK, where also the Juke and the Leaf roll of the production lines.

We can understand its success, as this SUV, which we tested in the Tekna top equipment version, has all the qualities to put a (broad) smile on your face. It has a very readable head-up display, a 12.3-inch ‘Nissan Connect’ touchscreen infotainment system, a powered rear tailgate and a of course many driver assistance functions. We liked the classic round dials, instrumentation buffs as we are, and also the good mix between touchscreen functions and physical knobs and levers.      

It is also practical, offering you a boot space of 505 litres, and it has very wide opening doors, a boon for mothers with toddlers which have to be heaved in the baby seats.

Comfort

This Nissan is very well insulated from engine and road/wheel noise, and the suspension is comfortable at speed. In urban driving situations on our Belgian inner city tram rails and ridges the suspension is rather firm, but feels never obtrusive. Of course the Tekna top equipment level leaves very little to desire indeed, including a very good sound system, which we enjoyed to the full in this marvelously quiet car.

This Qashqai really convinced us by combining the wonderful qualities of EV driving with the limitless mobility a fuel powered combustion engine offers us. We must admit that your servant regretted to part with it…

Hans Knol ten Bensel

We spoke with Béatrice Foucher, Brand Chief Executive Officer of DS Automobiles…

Posted in Automobilia, Car manufacturers strategy, Car presentations, Concept Cars, Design, Fashion, Interviews, Lifestyle, men women and carsLeave a comment

We met already Mme Béatrice Foucher at the presentation of the DS 4 last year in Chantilly, where she presented the strategy of DS Autombiles at the “DS Week” event…

DS Automobiles is carving a fine niche for itself in the premium segment. Your servant appreciates the refinement, comfort and last but not least the style of these fine DS automobiles. You can understand that we were delighted to meet Mme Béatrice Foucher at the presentation of the DS 4 in the “DS week” last year in Chantilly. Then, the entire press presentation of this noble automobile was in line with its qualities: we were not only able to meet Mme Béatrice Foucher personally at dinner, together with the communications people of the brand at lunch, we also had interesting workshops with the designers, engineers and last but not least the craftsmen and artists who make the DS 4 into the hand made four wheeled gem it is. You can read more about this event in our columns, see https://autoprova.be/2021/09/05/we-had-a-first-drive-with-the-elegant-ds-4-the-electrified-future-has-arrived-at-ds-automobiles/

At the Brussels Salon this year, we were again invited to have an interview with her. Just read further…

Hans Knol ten Bensel

A prototype of the DS 4 was displayed in Chantilly, symbol indeed of French “Savoir faire”…

HKtb: I have to congratulate you on your client approach and your philosophy to extend the refinement of your cars, not only in its external styling, but also in the interior.

BF: Indeed, that is our “raison d’être”, it is a combination of technology and the French “savoir faire” or know-how. Indeed, after having admired the exterior, customers must open the door of our cars, like for instance the DS4, see the new leather, the new solutions in the interior we developed in the DS3, the new DS7. From the next year onwards, we are going to create what we call collections, like there exist in the world of fashion.

The stunning interior of the DS prototype seen last year in Chantilly. Look at the contours and wood lined finish of the seats. A harbinger of things to come?

HKtB: We see here on the Salon, the very stylish DS E-Tense Performance 600 kW prototype, are there details of this car we will see in the production models?

BF: This will be more for the exterior than the interior, its bodywork lines which will be seen on our cars from 2024 onwards.(See our photo below of this prototype)

HKtB: But you emphasize the “savoir faire” Français, the French art of life…in automotive mobility.

BF: Indeed, that’s it. This lies in the materials we use, the art of treating them and producing exquisite textures. The French know-how in terms of stock market value lies now in the companies producing luxury goods, who have an established international reputation. This know-how is internationally recognized and appreciated, and this we put into our cars. Indeed, we see the car as a part of the interior one lives in, a part of one’s private home, and so the satisfaction and the reason people buy our cars is this choice of materials which appeals to them.

The reasons why our clients buy a DS is first of all the design, both as well exterior as interior, as this is a car which tells something about them. The second element is the elegance and the luxury and last but not least, the comfort. These are the three aspects which make people purchase a DS. The level of satisfaction is very high; clients are very pleased with their choice.

HKtB: Are your clients mostly women?

BF: No! When we look at the statistics, we have the same share of male clients than the other premium brands, even for the DS3, which appeals only slightly more to women. The reason why our clients buy a DS is because it’s a French premium brand, they like a different car in this premium segment, and indeed, the (male) clients show the car to their spouses, they enter the car, and they fall for it. So indeed we have a female clientele “on the second row”, they have a strong influence in the choice of the car which doesn’t show in the statistics.

HKtB: When cars are too feminine, women (and men) don’t necessarily buy it…

BF: Indeed, but as soon as the cars embody a social statement, as premium cars do, the (sexual) codes are not important. We put forward the codes of “savoir faire” Français, of luxury, of refinement, which appeals to both men and women.

HKtB: Indeed, a Cartier watch also appeals to men…

HKtB: The successes of your involvement in the Formula E racing does not really translate into the image of the brand…it did not create the “Audi” effect.

BF:  You mentioned Audi. Now their Quattro was a car entering in rallies with iconic figures behind the wheel. Rallies are very popular. We are a young brand, dating from 2014, we chose the Formula E because it tells the story of our brand, with its fast and early move towards electrification. Formula E is not as popular as F1 for example, but it is iconic and indeed quite amusing and interesting.

I mention also here that the DS 7 360 or the DS9 is built by the DS Performance team. This means that besides the drivetrain which is shared with Peugeot, everything else is specific, it has a unique “feel” on the road and offers an exceptional handling. We also optimized the regeneration also on this car, which clients consider important. But indeed, we don’t have decades of sporting history to tell here…

HKtb:  Also the typical DS client is not the one who drives (very) fast or seeks the ultimate in performance…

BF: Indeed, this is what we want, and that’s the reason why we call it also “the art of the voyage”. The quality of the time you spend in the car is important. The satisfaction enjoying the comfort of a car being surrounded by noble materials. Of course, you have not less than 360 HP. I can use them if I want it, but what is offered here with this car to me is comfort and refinement. One has more than enough power at hand, but it is not an issue.

HKtb: Are your clients young, and is connectivity important for them?

BF: Our clients are not young, which is the case for all premium brands, if one looks at the B to C statistics, they are between 58 and 60 years old, the B to B is younger, from 45 to 50 years, let’s say. Everybody wants to be seen as an amateur of technology, being a “technophile”, because one thinks that if you don’t love technology, you are missing out. So everyone wants a car which is up to this. It is a social statement of modernity. I tell to my teams, the value of a car is nowadays 50 % hardware and 50 % software.

HKtB: This digitalization takes still further steps, like is shown by BMW with its “Neue Klasse” with screen wide displays and dashboard instrumentation and touch knobs and buttons reduced to the minimum, as the underlying digital menus are doing the rest.

BF: Our philosophy is very clear and we showed it also on our concept car, it is to say that what makes the value of our cars is that when you open the door, you have the impression to enter in a Bugatti. We have refinement, savoir faire, and this we want to stress even more in the future. Of course we consider also the increasing digital infotainment needs, as a modernist social statement, but we want this digital element to disappear when the client wishes so. If you enter the car, there is nothing on the screen. Only when you put the contact, the screen appears. That is our philosophy and our goal. Because at a certain point, showing a plethora of screens is not premium. The faculty of having the information appear and again discreetly disappear is premium. This is the direction in which we work. Of course, we need the technology to make this happen.

HKtb: What I would also look for in future DS automobiles is incredible sound…

BF: We made a partnership with Focal, installed in our higher equipment versions like the Rivoli line, which reaches already very good sound quality… of course we have now more silent, electrified or fully electrified cars, which makes this even more important. Everybody works on this, and we also work with partners who have built an enviable reputation in pure sound management. You will see more in the future…

HKtb: When I travel on a motorway, in a certain region, I would like to tune in on my sound system for cultural, historic or general information about where I travel.

BF: This fits in our philosophy of cultivating “the art of the voyage”, and this is also want the digitalization to bring us. My name I Beatrice, and I want to know about the culture, or art places to visit in the region or city where I travel. This is what connectivity should give me.  

 HKtb: I thank you for this interview.   

Hans Knol ten Bensel

We spoke with Pierre Leclercq: “our Citroën Oli is not only style. It is French Design.”  

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Car technology, Concept Cars, Design, Driving accessories, Environment, Fashion, Future car technology, Interviews, Lifestyle, New Models, Profiles, prototypes, Suppliers and car industryLeave a comment

On the Brussels Salon, Citroën showed its already iconic Oli prototype, a harbinger of things to come in the Citroëns which will be in the showrooms already this and next year. Reason enough for your servant to have a talk with its head of design, Pierre Leclercq, about the design philosophy of the progressive brand with the “double chevron”, and so much more…

Hans Knol ten Bensel

I started this interview asking indeed about this new design philosophy of the brand, striving towards simplicity, practicality, lightness, durability and sustainability in a very bold and original package.

PL: “With the Oli, there are two things. First there is the brand identity, as we show with the Oli styling elements which we will bring to the market as soon as this year. The front end, the new logo, the head- and rear lamps, also the coherence between the front and rear end. The latter is a very important element in our brand identity. (We have seen this already in the Ami – editor’s note).

The form language, the simplicity of the edges and the curves will also be seen on our future production cars, but then also the contrasting vertical elements will be present. Our designers will deviate here from the strictly automotive styling which you see in the other brands of the group, we have a non-automotive touch which will be a distinctive element in our future styling.

The magic goals of French Design…

The second fact is that the Oli is not just a styling exercise. It is not only style. It is really French Design. We work together with our engineers to reduce weight, the cost, we are striving for intuitive and simple solutions.

For instance the seats. It’s very important, we work with a whole team to get a seat which is very distinctive, which we can put into production. We discovered with the Oli that our clients are ready for these things. We see that our clients are ready to take bold steps together with us, because we have an image that we will bring something more on the road than just a nice looking car.

HKtB: This translates also into the choice of the materials, the dialogue with the suppliers about the substance and texture of the elements and their surfaces, their unique touch and feel, the atmosphere and character this gives to the car…

PL: We will be a zero carbon company in 2038, and this has a huge impact on materials. Not so long ago, the choice of the materials came very late in the process of building a car. The exterior and interior, the colors, it was seen as pure decoration. Here and there, one started to use recycled materials for some items, but that was it. This process is now completely turned around at Citroën. We now ask first to tell us which materials we can use, as we want recycled materials, unpainted, and we will go from there and adopt them. This is most interesting. And I think that our clients are also ready for this.

HKtB: These elements and this approach we also see in the Ami. The French, as even Mr. Tavares recently put it, love their individual mobility. The Ami is fit for the (mega)city… will there be other models geared for a new City Mobility in the spirit of the Oli?

We always search for new solutions…

PL:  We have many projects running now. It’s a bit like a funnel. When there is one project hitting the road, we have already other proposals in the pipeline. We are always searching for new solutions. If you remember, two years ago, we showed a rather disruptive project of robotized platforms, which is an intelligent use of the present day autonomous technology, in controlled urban areas. But I imagine perfectly in 2030 and 2035 that these solutions will be used in our cities. The design will then focus on the interior of the cabins and structures rolling on these platforms, a very interesting evolution.

The Ami represented a big risk for us, indeed, we thought about the city, but in fact, we scrutinized the clients who bought the Ami, age, location, etc, and we noticed that the Ami is not only used in the cities. We have clients who buy the Ami for their children and grandchildren, remember that in France you can drive an Ami at the age of 14, and it is better than a scooter. And in a market where these vehicles cost between 12 and 15.000 Euros, ours is available for 6.000 Euros… No small feat, as we respect the profitability margins of our group! It is now on the market for two years, and it has grown more into a lifestyle than a car. This is also what the 2 CV has achieved. It is not easy to create the same phenomenon in this day and age…

HKtB: Can you tell a bit more about your Ami buyers?

We have also many clients who buy an Ami for their holiday homes. And as I said, of course grandparents who buy the Ami for their grandchildren. There are also clients who own a Ferrari and buy an Ami for their third or fourth car…

HKtB: We talked earlier in Paris about your open mindedness towards other designers, in other sectors, who could become involved in offering elements of the car during its life, for example, that in a further future one could offer replacement seats for Oli’s or Citroëns who after years of intensive use get a bit long in the teeth… or, rather, offer parts and items to customize the new Citroëns…

PL: It’s a philosophy I love very much. People more and more want an object which is really theirs. Design is not a luxury anymore. If you go for an Ikea kitchen, you can still choose the finish, styling and colors you want, to make it yours. This is now also true for cars. We have started this with the Ami.

HKtB: It is also true for Jeep. Mopar offers a wide array of accessories.

PL: Indeed, this trend is already more prominent in the States. But with the Ami we started off in Europe with the same trend. Not that we offer many accessories, but we created a desire with the customer to customize his car. It’s like Apple. They don’t offer many accessories themselves, but are produced by Belkin etc. It is a very interesting path for our cars in the future. This will give us for instance incredible interiors. I want the client to appropriate our geometries. Why not share our geometries on the internet Open Space and invite the developers to have fun with it?

Every brand has its own design team to embody its proper DNA

HKtB: What is your relationship or rather dialogue between your styling department and the suppliers? Do they come present you what is possible, or after having established a manifest for yourselves what you want to do in styling in the next five years, let’s say, you ask them to come up with new materials, possibilities?

PL: The dialogue goes both ways. But I want to stress here that the design has become very important. The suppliers are specialized in offering technology, for instance for the platforms we have conceived within the group, but over the last 30 years, what have we done? Instead of asking PininFarina or Bertone to style all the cars in the world, we have all established our design centers which carry truly our DNA, and every brand has its own equipe or team of designers. This is génial, because we have cars within the group which don’t resemble each other at all…

HKtB: With the new materials comes also repair friendliness, durability…

PL: Indeed, we want our cars to have a longer lifespan, and we will refresh them within our network. We need of course more control as nowadays we don’t see the car anymore after it has been produced. We have to control the recyclability of the car. Otherwise it’s no use to build the car with recyclable materials.

HKtB: It think it is necessary to tell the client that his car now has a long life and that you as the manufacturer will follow the car throughout its life.

PL: Indeed, a lifelong car, staying with you the rest of your life.

HKtB: Indeed, that as a brand policy you commit yourself to the clients that your Citroën model, Type A, B, or whatever, that you will always follow this car for decades to come…

PL: Ca serait génial, that would be a stroke of genius. It is our goal. It would be very interesting and it would completely change the idea of the automobile of today.

HKtB:  The youth is already there. They support and adopt the circular economy. I think Citroën is the right brand to do this. 

PL: Indeed, we push within the Stellantis group for these concepts, and I think that our clients are far more inclined to make these choices than the buyers of other brands.

HKtB: I thank you for this interview. Thinking out of the box is always interesting.

PL: I thank you, always lovely to exchange these ideas, thank you for the conversation. I also think that every car we build has to make the life of our clients better. These are not empty words. The Ami improves lives. We offered a new service; in Paris, people smiled when they saw the car. It takes something to convince a Parisien!

Hans Knol ten Bensel

A look at Peugeot’s future products and electrification strategy with the INCEPTION CONCEPT…

Posted in Automobilia, Car Events, Car News, Car presentations, Car safety, Car Shows, Car technology, Concept Cars, Design, Environment, Future car technology, Future technologies, Lifestyle, New Models, prototypesLeave a comment

Featuring a revolutionary exterior and interior design, including the next-generation PEUGEOT i-Cockpit® and innovative Hypersquare control system with steer-by-wire technology, the INCEPTION CONCEPT will inspire PEUGEOT’s future products from 2025 onwards. The better news is that Peugeot plans to bring most of its innovations to production (!)

Based on the STLA Large platform, the fully electric INCEPTION CONCEPT is powered by a 100kWh battery providing a range of 497 miles. With two electric motors, the INCEPTION CONCEPT produces almost 680hp and accelerates from 0-62mph in under three seconds. The model also features 800V technology, enabling it to add 93 miles of range in just five minutes, and is capable of wireless induction charging.

Linda Jackson, CEO of the PEUGEOT brand, said: “PEUGEOT is committed to the electrification of its range. In 2023, our entire line-up will be electrified and in the next two years, five new 100% electric models will be launched. Our ambition is simple: to make PEUGEOT the leading electric brand in Europe by 2030. This objective and ambitious vision pave the way for a radical transformation for the brand, as represented by the INCEPTION CONCEPT.”

Indeed, PEUGEOT will reduce its carbon footprint by more than 50% by 2030 in Europe and to become fully Carbon Net Zero by 2038.

Over the next two years, PEUGEOT will launch five new 100% electric models and by 2030, all PEUGEOT cars sold in Europe will be electric.

Dramatic design

The PEUGEOT INCEPTION CONCEPT introduces a new, simpler and more refined design language for the brand, which will be introduced on future models from 2025. At the front, it features an all-new light signature incorporating PEUGEOT’s distinctive claw design, which is merged with the front grille to create a single object that also houses the sensors. This is made up of a single piece of glass with the logo in the centre, magnified by the 3D luminescent effect.  The front grille and headlamps are in my opinion a bit reminiscent of the ‘70s 504… 

A TECH BAR runs horizontally through the door layer. This flush screen emits different messages to the outside of the car when the driver and passengers approach it. The artificial intelligence equipped on the PEUGEOT INCEPTION CONCEPT makes it possible to recognize the driver in order to set up the comfort settings (seat posture, temperature, driving mode and multimedia preferences) desired by each occupant. In addition, the TECH BAR also displays the battery charge level and houses many sensors and radars, leaving the bodywork completely smooth.

The INCEPTION CONCEPT’s bold design incorporates 7.25m2 of glazing to create a glass capsule for the passenger compartment that plunges to the driver and front passenger’s feet. All the glazing (windscreen, side windows and quarter windows) is made from glass designed for architecture. Adapted to the PEUGEOT INCEPTION CONCEPT, it retains its exceptional thermal qualities and benefits from a multi-chrome treatment (treatment with metal oxides), a process initially used for the visors of astronauts’ helmets by NASA.

Completing the car’s unique design is an exclusive body colour, which highlights the shapes in the bodywork and interacts, like the glazing, by tinting according to the external environment. The paint is single-coated, meaning far less energy is consumed during its application.

‘BEV-by-design’ platform

The INCEPTION CONCEPT has been given the silhouette of a low (1.34m) and efficient saloon and is 5m in length. It is based on the STLA Large platform, one of four future Stellantis Group “BEV-by-design” platforms. The arrival of this new range of platforms from 2023 will revolutionize the PEUGEOTs of tomorrow. Specifically created for electrification, they offer major differences in terms of architecture which enabled designers to completely reshape the PEUGEOT INCEPTION CONCEPT’s passenger compartment.

The new “BEV-by-design” native electric platforms will also introduce technological modules powered by artificial intelligence: STLA Brain, STLA SmartCockpit and STLA AutoDrive. Like the INCEPTION CONCEPT, future PEUGEOT models will be equipped with STLA Brain artificial intelligence and will be fully connected.

Powertrain

The 100% electric PEUGEOT INCEPTION CONCEPT is equipped with 800V technology. Its 100kWh battery enables it to travel 497 miles on a single charge, with extremely low consumption of just 12.5kWh per 100 km. The INCEPTION CONCEPT is capable of adding 19 miles of range in one minute, or 93 miles in five minutes, and can also be recharged wirelessly by induction.

Two compact electric motors, one at the front, the other at the rear, make the PEUGEOT INCEPTION CONCEPT a four-wheel drive vehicle. The combined power is close to 680hp (500kW), enabling it to accelerate from 0-62mph in under three seconds.

Next-generation i-Cockpit®

With its new Hypersquare control system, the PEUGEOT INCEPTION CONCEPT offers an agile driving experience and an all-new, more intuitive i-Cockpit®. Inspired by video games, the Hypersquare control system does away with the conventional steering wheel in favour of digital electric controls and steer-by-wire technology.

The centre of the Hypersquare is a tablet-type screen dedicated to the distribution of control information. The pictograms for the different features (air conditioning, radio volume, ADAS etc.) are displayed on the two side panels to facilitate access to the chosen control. The latter is located inside the circular recesses and can be accessed by moving the thumb only, without taking your hands off the steering control.

The next generation i-Cockpit also includes the Stellantis STLA SmartCockpit technology platform and STLA AutoDrive, enabling Level 4 autonomous driving. When driving is delegated, Hypersquare retracts and a large panoramic screen slides out from the floor to offer a new passenger compartment experience.

 PEUGEOT’s goal is to introduce the Hypersquare on a next generation vehicle in the range before the end of the decade.(!)

Interior

The PEUGEOT INCEPTION CONCEPT features a minimal cockpit dedicated to the driver alone, which does without a dashboard, crossbar and the bulkhead, providing a completely open view of the road.

Sustainable ‘moulded textiles’ are also used throughout the interior. Scraps of 100% polyester fabric from the design centre’s prototyping workshops or from suppliers are re-used to make load-bearing or trim parts. The seats are covered with a velvet made from 100% recycled polyester, which extends onto the floor and features 3D patterns to act as a floor mat.

More Peugeot news soon…

Hans Knol ten Bensel

BMW rides you into an enhanced real and virtual world at CES Las Vegas…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Car technology, Concept Cars, Design, E-mobility R &D and solutions, Future car technology, Future technologies, Lifestyle, New Models, prototypesLeave a comment

The BMW Group is sharing its vision of the future digital experience, both inside and outside the vehicle, at the Consumer Electronics Show (CES) 2023 in Las Vegas.

It presented the BMW i Vision Dee, a futuristic mid-size sedan with a new and pared-down design language. The name “Dee” stands for Digital Emotional Experience – and that is precisely its aim: to create an even stronger bond between people and their cars.

This car has future digital functions will go far beyond the level of voice control and driver assistance systems we are familiar with today.

It starts all with a BMW Head-Up-Display extending across the full width of the windscreen, providing a glimpse of the next vehicle generation.

From 2025 onwards, this innovation will be available in the models of the NEUE KLASSE. The BMW Group has also refined its use of colour-change technology. Having unveiled the BMW iX Flow Featuring E Ink, with the ability to change from black to white, at the last CES, BMW i Vision Dee can now curate its exterior in up to 32 colours.

“With the BMW i Vision Dee, we are showcasing what is possible when hardware and software merge. In this way, we are able to exploit the full potential of digitalisation to transform the car into an intelligent companion. That is the future for automotive manufacturers – and, also, for BMW: the fusion of the virtual experience with genuine driving pleasure,” said Oliver Zipse, Chairman of the Board of Management of BMW AG. “At the same time, BMW i Vision Dee is another step on the road to the NEUE KLASSE. With this vision, we are looking far into the future and underlining the tremendous importance of digitalisation for our upcoming product generations.”

With its intelligent, almost human capabilities, BMW i Vision Dee accompanies drivers not only through real-life situations on the roads, but also in their digital environment.

“A BMW lives by its unparalleled digital performance. BMW i Vision Dee is about perfect integration of virtual and physical experiences,” said Frank Weber, member of the Board of Management of BMW AG responsible for Development. “Whoever excels at integrating the customer’s everyday digital worlds into the vehicle at all levels will succeed in mastering the future of car-building.”

BMW Mixed Reality Slider: into the virtual world in five steps

The BMW, in combination with the advanced Head-up Display, is the digital highlight and central operating control of BMW i Vision Dee. The completely virgin and simple dashboard panel shows just a line with dots. This is the Mixed Reality Slider. By using shy-tech sensors on the instrument panel, drivers can decide for themselves how much digital content they want to see on the advanced Head-Up Display. The five-step dot selection ranges from analogue, to driving-related information, to the contents of the communications system, to augmented-reality projection, right up to entry into virtual worlds. In parallel, dimmable windows can also be used to gradually fade out reality. Mixed reality can be experienced in BMW i Vision Dee in an immersive way that engages different senses without requiring any additional tools, creating a new dimension of driving pleasure for the user.

Advanced BMW Head-Up-Display: in NEUE KLASSE from 2025

The BMW Group is known in the automotive sector as a trailblazer for the Head-Up-Display and has systematically refined this technology over the past two decades. In BMW i Vision Dee, projection across the entire width of the windscreen allows information to be displayed on the largest possible surface – which only becomes recognisable as a display once it is activated. In this way, the BMW Group demonstrates the huge potential of projection technology and BMW i Vision Dee visualizes how a advanced Head-Up-Display could also be utilized in the future for the display and operating concept. The standard-production version of the BMW Head-up-Display extending across the full width of the windscreen will be used in the models of the NEUE KLASSE from 2025 onwards.

Welcome scenario with voice and phygital icons

The digital experience already begins outside the vehicle, with a personalized welcome scenario that combines graphical elements, light and sound effects. Natural language serves as the simplest, most intuitive form of interaction, enabling perfect understanding between humans and their vehicles. The headlights and the closed BMW kidney grille also form a common phygital (fusion of physical and digital) icon on a uniform surface, allowing the vehicle to produce different facial expressions. This means BMW i Vision Dee can talk to people and, at the same time, express moods such as joy, astonishment or approval visually. BMW i Vision Dee can also project an image of the driver’s avatar onto the side window to further personalize the welcome scenario.

World premiere for full-colour E Ink technology

Following the spectacular debut of the BMW iX Flow Featuring E Ink at CES 2022, the BMW Group is now unveiling a full-colour version of the E Ink technology in BMW i Vision Dee that will be used as the outer skin of the vehicle for the first time worldwide.

BMW i Vision Dee, rather than simply alternating between black and white, now showcases a multi-coloured, fully variable and individually configurable exterior. An ePaper film from the BMW Group’s cooperation partner, E Ink, is applied to the body to create this magical display of colour. Up to 32 colours can be displayed.

The body surface of the BMW i Vision Dee is divided into 240 E Ink segments, each of which is controlled individually. This allows an almost infinite variety of patterns to be generated and varied within seconds. The laser cutting process used to trim the films and the electronic control design were developed in partnership with E Ink. The adaptation of this technology for curved surfaces and the programming of the animations, were developed by BMW Group’s in-house engineers – enabling a form enabling a form of customisation that is unique throughout the automotive sector worldwide.

Reductive design – inside and out

The design of BMW i Vision Dee has been deliberately pared down to focus attention on the digital experience and the DNA of the BMW brand. The exterior is defined by the classic three-box sedan design that forms the core of the BMW brand. Traditional design elements, like the BMW kidney grille, twin circular headlights and the Hofmeister kink, are reimagined, with phygital icons replacing analogue elements. This gives BMW i Vision Dee its own digital, but human, character.

Inside, digitalisation goes hand in hand with reductive use of materials, operating controls and displays to ensure nothing distracts from the digital experience and the new feeling of enhanced driving pleasure. The unconventional design of the steering wheel, with its central vertical spoke, creates touchpoints that come to life when approached or touched and can be operated by moving the thumb. These phygital touchpoints control selection of the content projected onto the windscreen and, together with the Head-Up Display, thus support the principle of “hands on the wheel, eyes on the road”.

“With BMW i Vision Dee, we are showing how the car can be seamlessly integrated into your digital life and become a trusty companion. The vehicle itself becomes your portal to the digital world – with the driver always in control,” said Adrian van Hooydonk, head of BMW Group Design. “Implemented the right way, technology will create worthwhile experiences, make you a better driver and simply bring humans and machines closer together.”

Another milestone on the road to the NEUE KLASSE

The future of the BMW Group is electric, circular and digital. BMW i Vision Dee represents the digital aspect of this trio and will be another milestone on the road to the next vehicle generation, the NEUE KLASSE. The BMW Group will provide further insights and glimpses of the revolutionary vehicle concept of the NEUE KLASSE over the course of 2023. See more news soon!

Hans Knol ten Bensel

Fiat present at CES with the 500 electric, and a metaverse powered showroom…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, New ModelsLeave a comment

The FIAT brand is playing its original approach to automotive mobility again at the Consumer Electronics Show (CES) in Las Vegaswith two major exhibits starring the New 500 electric.

FIAT unveils for the first time the world’s first metaverse-powered showroom: the FIAT Metaverse Store. This revolution in customer experience is accessible, thanks to the partnership with Microsoft and Touchcast, at the Microsoft booth located in the West Hall #6017, recreating the feel of a showroom from home.

Alongside the FIAT Metaverse Store, the New 500 will also be the center of attention in the Free2move area of the Stellantis booth.

Reinventing customer approach in North America…

At the Los Angeles Autoshow 2022 Olivier Francois, FIAT CEO and CMO Global of Stellantis, officially announced the launch of the new Fiat 500e in North America in the first quarter of 2024 and the FIAT Metaverse Store will be one of the key innovative pillars for launching the FIAT electric icon in the US.

Launched last December in Italy, the FIAT Metaverse Store makes the Brand a leader in offering an immersive, simple, and human-driven brand experience. Inside the FIAT Metaverse Store, customers will be able to discover, configure, and even purchase the New 500 La Prima by Bocelli, experiencing the feel of a showroom with the help of the FIAT Product Genius, a real person ready to answer any questions. The entire New 500 line-up, additional models and markets can be found in the metaverse-powered showroom during 2023.

The FIAT Metaverse Store is a user-friendly and accessible to all technology, in fact it does not require a virtual reality (VR) headset or expensive hardware. The public will be able to try it out at the Microsoft booth located in the West Hall #6017 at CES 2023.

FIAT and Free2move together for more sustainable urban mobility

Lights shine on the New 500e 3+1 in the special Rose Gold livery, displayed as the only car at the Free2move stand. A collaboration, between FIAT and Free2move, stemming from a common goal: to build an increasingly sustainable urban mobility ecosystem as part of their mission to make EVs more accessible. The two brands are working on a unique value proposition that goes beyond rental, car sharing, and subscription. The customers will be able to enjoy a 360° Free2move experience through a Fiat car for a few minutes, several days or even months. This offer allows customers to tailor their rental contracts and associated services based on usage with a single invoice, directly from a dedicated APP.

More Fiat news soon also on the Brussels Salon de l’auto!

Hans Knol ten Bensel

Volkswagen Group of America will provide a glimpse of the ID.7…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Design, E-mobility R &D and solutions, Future car technology, Future technologies, New ModelsLeave a comment

At the CES (Consumer Electronics Show) in Las Vegas between 5 and 8 January 2023, Volkswagen Group of America will showcase its first fully electric sedan based on the modular electric drive matrix (MEB). It will still be seen in a “smart” camouflage, which uses unique technology and multi-layered paintwork to create light effects on parts of the vehicle.

The ID. AERO3 concept vehicle initially presented in China already provided a preview of the new model, which embodies an aerodynamic design concept and is able to achieve ranges of up to 700 kilometers (WLTP).

After a six-year break, Volkswagen Group of America is returning to the CES – the world’s largest trade show for electronics – with a very special product…

With the new ID.7, VW is extending its electric model range into the upper segments. The ID.7 is one of ten new electric models that VW is planning to launch by 2026.

VW seems to have learned some lessons when it comes to the functionality of the various infotainment and dashboard commands. It ofeers a new display concept, an augmented reality head-up display, a 38-centimeter (15-inch) screen and new air conditioning controls integrated into the first level of the infotainment system. Now we also have illuminated touch sliders…

Like all other models in the ID. family, the ID.7 is based on the MEB of the Volkswagen Group. The advantages of the modular matrix with short overhangs and long wheelbase (2.97 meters) provide a large interior.

With its ID.7 sedan, Volkswagen is expanding its successful fully electric ID. family into the upper middle class of the high-volume segment and advancing its electric mobility campaign with the ACCELERATE strategy. VW has already reached a first milestone: Since the first ID.3 models were handed over to customers in September 2020, Volkswagen has delivered 500,000 vehicles from its ID. family worldwide through its subsidiaries – around one year earlier than planned and despite the ongoing difficulties in the supply chain.

After the ID.3, ID.4, ID.5 and ID.6 (only in China) models and the new ID. Buzz7, the ID.7 will be the sixth model from the ID. family and is Volkswagen’s second global car to be based on the MEB after the ID.4. It is planned to launch the electric sedan in the three primary markets of China, Europe and North America. The ID.7 for the European market will be produced at the Volkswagen Emden plant. After the ID.4, it will be the second model based on the modular electric drive matrix to be built in Emden.

More news soon!

Hans Knol ten Bensel

We drove the Kia Niro Hybrid: your smooth and stylish companion…

Posted in Automobilia, Car News, Car presentations, Car Tests, E-mobility R &D and solutions, New ModelsLeave a comment

The second generation Kia Niro is succesfully restyled… Photo was taken here with the “vintage” Fujifilm Finepix 100fs: bought recently for merely 59 Euros…

With the second generation, the Kia Niro has decidedly come of age. It is altogether more stylish, and comes with all possible electrified drivetrain options: you can have it as a straightforward hybrid, like the Niro we tested here for you, or as a PHEV, and of course as a fully fledged EV. We impressed by the smoothness, space, comfort and user friendliness of this “pure” hybrid, which can be very frugal too… just read further.

Hans Knol ten Bensel

Indeed, the Niro has gained in style. The C Pillar ends with nicely sculpted rear lights, curved like we see on Volvo’s, with a passage between the bodywork and the lamp cluster, to improve air flow along the side of the car.

Photo taken again with the “vintage” Fujifilm Finepix… showing excellent colour balance.

The C-pillar can also be had in contrasting colours. Also the front end has improved in stance and presence with a wide aluminium coloured rim around the hood and its big lights. The same goes for the interior. A sweeping design, good quality materials give you that premium feeling.

Photo here taken with the latest “flagship” Samsung S22 smartphone … wih heavy correction of colour balance and exposure.

The screen layout is very good, nice to toggle between climate and screen controls to get you swiftly to the commands you want. We like the round control knob to switch between D, N and R, with the P button right on top of it, it’s all very ergonomic and you wouldn’t want it to be otherwise once you are at behind the wheel of this Kia. Many ergonomic solutions and knobs are similar to the flagship EV6, and that’s only to be applauded.

Photo here taken with the latest “flagship” Samsung S22 smartphone

The seats are good, with even a relax mode in the front seats depending on the equipment version you choose. There is plenty of storage, and leg and headroom is also quite decent in the rear. The floor in the rear is completely flat, so even three adults can reasonably sit in comfort. Boot space is excellent with a good 450 liters, and there is a separate tray for sundry like spare wheel equipment etc.

Drivetrain: smoothness and efficiency first…

Photo here taken with the latest “flagship” Samsung S22 smartphone

The hybrid Niro has a 1,6 litre Turbo under the hood, Kia calls it its Smartstream 1.6-litre GDI (Gasoline Direct Injection) gasoline engine. It is a 16 valve four cylinder, with a compression ratio of not less than 1:14, with Continuously Variable Intake and exhaust Valve Timing, or abbreviated CVVT. To improve torque and thermal efficiency in the mid rev range it is a long stroke unit, 72 x 97 mm, and you understand immediately that this is not the unit that likes to be trashed hard with corresponding high revs. Surprisingly however, it develops its maximum power of 105 PS @ a rather high 5,700 rpm, and its maximum torque of 147 Nm comes in @ 4,000 rpm.

Photo here taken with the latest “flagship” Samsung S22 smartphone. Not the frugal average consumption of 5 l/100 km.

But its torque curve is relatively flat, so indeed there is plenty of pulling power at low revs. It runs indeed very smoothly at low revs, remember, it runs on low-friction ball bearings(!) The hybrid version has a permanent magnet synchronous electric motor of 32 kW, but more importantly, developing a torque of 170 Nm, and that gives you the pleasant liveliness and delightful “EV feel” at low urban speeds. The Niro Hybrid is paired as standard with the brand’s second-generation six-speed dual-clutch automatic transmission (6DCT with gears optimized for transmission efficiency, and the removal of the reverse gear that saves a significant 2.3kg). This improves the overall consumption by 0.62%. Reverse drive comes indeed from the electric motor…

Photo here taken with the latest “flagship” Samsung S22 smartphone. When driving very slowly due to urban congestion, the hybrid relies on the electric motor, and shows its worth: merely 2,9 litres/100 km on the driven distance!

The Niro Hybrid shows its smooth qualities when driven with restraint and anticipation; the engine and transmission then behave supersmooth, and the Artifical Intelligence of the power train will choose the optimum balance between engine and battery power, and manages to achieve optimal efficiency, together with more than enough power combined with excellent acoustic comfort. Consumption even in the busiest of urban traffic will remain well below 6 litres/100 km, and that’s what it’s all about when we talk about environment conscious transport.

Photo taken with the Fujifilm Finepix S100fs again…

Of course, higher speeds on Autostradas will take their toll, but driving at the legal maximum speeds on our European motorways will not set you back unduly. Performance is all you could wish for: 0 to 100 km/h in 10,4 seconds, a top speed of 165 km/h, on 16 inch wheels… The manufacturer quotes an average fuel consumption between 4.4 – 4.7 litres/100 km, and CO2 emissions of 100-107 g/km according to the wheel dimension, i.e. 16 and 18 inch respectively. 

Photo here taken with the latest “flagship” Samsung S22 smartphone.

Predictable handling

The Niro uses Kia’s third-generation ‘K’ platform, conceived from the outset to support a mix of electrified powertrains and provide high levels of torsional rigidity. The Kia engineers have tuned the suspension and steering system with an eye to comfort, succeeding in also offering a responsive, confidence-inspiring driving experience.

Photo here taken with the latest “flagship” Samsung S22 smartphone.

State of the art driving aids and connectivity

The usual driving aids are found, like Lane Keeping Assist (LKA), Lane Following Assist (LFA), Highway Driving Assist (HDA), Driver Attention Warning (DAW), High Beam Assist (HBA), Navigation-based Smart Cruise Control-Curve (NSCC-C), Blind-Spot Collision-Avoidance Assist (BCA), Rear View Monitor (RVM) and Rear Cross-Traffic Collision-Avoidance Assist (RCCA). The Niro’s front view camera and in-built navigation system integrate to display the current speed limit. The Intelligent Speed Limit Assist (ISLA) system will display the current speed limit and automatically change the set speed (after confirmation by the driver) by using the information detected through the front view camera.

Last but not least, a clear 10-inch head-up display (HUD) system projects vital driving information, including speed, ADAS data and navigation indications onto the front windscreen, very readable indeed.

Photo here taken with the Fujifilm Finepix S100fs

Conclusion

The current Niro family is Kia’s third best-seller in Europe. Did you know that of the previous generation, Kia has sold 350,000 Niro models (54% HEV, 15% PHEV and 31% EV). So Kia took utmost car to hone this important car for them to another level. It is also reflected in the prices, but then it offers style and top notch technology. It will prove to be a very pleasant and smooth companion, as we said in the title of this report, when you drive it with respect for the environment and the law… indeed, as hybrid cars are meant to be driven to show their sublime qualities…

Hans Knol ten Bensel

Photographers’ notes: we used besides our state of the art Samsung S22 phone also the Fujifilm Finepix S100 fs, which proved a very creditable contender…

Opel Mokka and the best barista in the world…

Posted in Automobilia, Car Events, Car News, Car presentations, Lifestyle, men women and cars, New Models, PhotographyLeave a comment

On October 1, coffee aficionados around the world celebrated their favorite hot drink on International Coffee Day.

This was a reason of the dynamic Stellantis PR team to to let one of the best baristas in Belgium, Peter Hernou, show us how to serve a good coffee. Because let’s face it, a Mocha coffee in the morning is a day without worries. And with the award-winning Opel Mokka, Opel offers the perfect companion to further color the day.

So we went to the beautiful Pajottenland around Brussels to have a drive with the Mokka and meet Peter Hernou and enjoy his heavenly coffee.

By the way, Opel chose the name “Mokka” by analogy with the coffee/espresso beans that are “small but with a lot of character” or, like the car, “compact in size and big in character”.

It was a very enjoyable day, and we learned a lot about coffee making. The first and most important rule is to have fresh roasted coffee beans, ground just minutes before you make it.

Of course we also had a delightful drive at the wheel of the electric Mokka through the hills of Pajottenland.

Of course, the customer has ample choice, this subcompact SUV from Opel is available as a battery electric vehicle, or with petrol and diesel engines, – just as they would choose their favorite coffee….

Hans Knol ten Bensel

Nissan press conference 2023: more than ever offering clever and future-oriented electrification with a renewed range…

Posted in Automobilia, Car Events, Car manufacturers strategy, Car News, Car presentations, Car Shows, Car technology, Design, E-mobility R &D and solutions, Environment, Lifestyle, New ModelsLeave a comment

Nissan Belux was the first to hold a press conference prior to the Brussels Auto Show 2023, and organized it at the magnificent premises of Quartier Papier in Zaventem. On the photo below you see the Nissan Ariya, which according to Nissan, redefines E-Driving…

At the start of the conference, Jerôme Saigot, Managing Director of Nissan Belux, stated that with the Ariya, LEAF and Townstar EV models, Nissan has a very nice range of e-vehicles. But consumers are still not fully ready for a 100% electric range of cars. With the new Qashqai e-POWER and the X-Trail e-POWER, they can experience the pleasure of a 100% electric transmission without having to recharge the car via a socket, thanks to a second gasoline engine that produces electricity, he said. Indeed, Nissan goes a step further than the competition with new technologies such as e-POWER. So Nissan reaffirms its role in the fields of crossovers and electric cars. But read further…

Hans Knol ten Bensel

Jerôme Saigot, Managing Director of Nissan Belux, presented the new Nissan electrified range and the environmental strategy of the brand towards 2030…

Nissan’s green strategy for 2030…

Jerôme Saigot also stressed that sustainability is at the core of Nissan’s long-term vision, Ambition 2030. Responding to critical environmental, societal and customer needs, this strategy sets out to deliver electrified models and technological innovation in key markets globally, empowering mobility and beyond. Ambition 2030 supports Nissan’s goal which is to be carbon neutral across the life cycle of its products and operations by 2050. 

Nissan JUKE Hybrid: new advanced powertrain offers efficiency and responsive performance

Indeed Nissan is embarking further on the 100 % electrification of its range. We have the Juke, the popular compact crossover, offered with hybrid technology. Key to the driving pleasure at the heart of the Nissan JUKE Hybrid is an advanced low friction multi modal gearbox, using  dog clutches instead of conventional synchronizer rings to shift the 4 “ICE” gears and 2 “EV” gears. Additionally, to reduce friction, this gearbox does not use a clutch. All vehicle starts are 100% electric, and the 2 EV motors are used in combination to synchronize the gears, delivering smooth and responsive acceleration. We will be keen to drive a hybrid Juke soon, and tell you about our driving experience with it.

A car which will please many is the Nissan Qashqai  e-Power, said Mervin Keuter, Communications Director at Nissan Belux, offering 100 % electric power without the need for recharging externally. Indeed, a combustion engine coupled to a generator provides the electricity. The e-POWER system consists of a high-output battery, complemented by a variable compression ratio 1.5-litre three-cylinder turbo-charged petrol engine generating 156hp, a power generator, inverter and 140kW electric motor of similar size and power output as found in Nissan’s electric vehicles. The petrol engine generates electricity, which can be transmitted via the inverter to the battery pack, the electric motor or both, according to the driving scenario.

Melvin Keuter, Communications Director at Nissan Belux, highlighted the qualities of the Nissan Qashqai  e-Power…

What sets this powertrain apart is that the electric motor is the sole source of power for the wheels, so its response is instant and linear. Needless to say that also here we are looking forward to gets our hands on one to experience how all this actually works. It certainly is clever and responds certainly to what modern-day drivers want… we also want to see how economical and environment friendly all this still is.

The dashboard of the new Nissan X-Trail with e-POWER and e-4ORCE…

Another important novelty for Nissan is the revamped X-Trail with its e-4ORCE  system on X-Trail and fully electric Ariya. The innovative e-4ORCE all-wheel drive system was conceived for use on either Nissan’s pure electric powertrains or with its e-POWER system, mentioned above. In both cases, the driven wheels are powered purely by electric motors fed by the battery.

In the case of the X-Trail, the dual e-motor system has a total output of 157kW (213PS) with a 150kW front motor and a rear 100kW motor. This generates lively acceleration from 0-100km/h in 7 seconds. Nissan proudly announces that a rear electric motor has its advantages: it has a 10,000 times faster rear torque response than a mechanical 4WD system(!).

Rémy Le Gall, Marketing Director of Nissan Belux, commented also on the electrified Nissan range and last but not least dealer organisation and client approach, of which more later in a separate report!

Now, on the X-trail, you can also opt for the turbocharged 1.5-litre variable compression ratio powering the wheels in the traditional fashion. Generating 120kW (163PS) and 300Nm of torque, it will be offered only in two-wheel drive configuration, with power to the wheels being transmitted via Xtronic stepped continuously variable transmission. In driving scenarios with relaxed driving and light acceleration, the engine switches to high compression ratio for optimised fuel efficiency, while in situations where more performance is needed, the compression ratio is adjusted to a low level.

The powertrain is also equipped with 12v mild hybrid technology. The system provides torque assist, extended idle stop, quick restart and coasting stop, with benefits to both fuel economy and CO2 output.

The Nissan X-Trail e-4ORCE offers 100 % electric power without the need for recharging externally…

Driving the future: the Ariya

Staying true to Nissan’s heritage of fun-to-drive, exciting vehicles, the Ariya is built on the all-new Alliance-developed CMF-EV platform that’s optimized to deliver unparalleled performance.

The Ariya’s all-electric platform combines excellent power delivery, charging capabilities and range, with a carefully tuned balance between ride comfort and handling agility. Available in three versions (Ariya 2WD 63kWh, Ariya 2WD 87kWh, Ariya e-4ORCE AWD 87kWh) and a range of up to 533 km, Ariya can confidently meet a variety of customer needs.

The Ariya 87kWh can recover up to 350 kilometres with a 30-minute quick charge using a CCS charging system. The battery pack sits at the base of the chassis to ensure 50/50 weight distribution on the e-4ORCE version and near-equal weight distribution on the 2WD versions. During benchmarking, engineers placed great emphasis on striking the ideal balance between handling agility, secure feeling and ride comfort, something not all EV rivals are known for.

Subtle regional differences exist for Ariya, as well. For example, European consumers demand responsive steering and high manoeuvrability, but also require additional stability at higher speeds, so damping forces were increased to improve body control. Nissan Europe engineers also adjusted spring rates and retuned steering feedback to increase on-centre definition at higher speeds.

A timeless Japanese design language…

Incorporating Nissan’s Japanese DNA, Ariya’s striking exterior and interior reimagines EV potential by embodying Nissan’s Timeless Japanese Futurism philosophy of powerful design that fuses aesthetics with functionality while creating an upscale, open atmosphere.

The all-new EV platform and compact nature of powertrain components made it possible for Nissan to position Ariya’s climate-control system under the hood. This allowed designers to use the whole length of the cabin and create a flat, open floor with a lounge-like space inspired by premium futurism.

For the LCV market: the new Townstar…

The Townstar EV builds on the success of the e-NV200. Built on a shared CMF-C platform, the new vehicle will be manufactured at the Alliance centre of excellence for small vans in Maubeuge, France.

The fully electric version of the all-new Townstar EV features a powertrain optimised with intelligent energy management and battery thermal cooling. The Townstar EV is able to achieve a superior range autonomy of up to 300km (WLTP cycle). Delivering 122 PS and 245Nm of torque, the Townstar EV’s  45kWh battery can accept AC charging (11 kW or 22 kW) or DC quick charging (CCS format). The latter of which enables users to charge the battery from 15% to 80% in as little as 37 minutes.

Lots of interesting news from Nissan, keep posted for further Nissan news and driving reports of their interesting new cars!

Hans Knol ten Bensel